Date: Wed, 6 Jan 2016 16:20:13 -0500
From: Nathan
Subject: Inforcer One

In an age where smart phones are nearly as powerful as desktop computers,
companies are racing to make every possible product connected, and wearable
technology is all the rage, it made sense that someone would realize the
market for connected, wearable slave control technology.  Introduced this
year during CES 2016, though not at the show since they would not allow
fetish products, the Inforcer One.

Yes, there are remote control buttplugs, remote shock collars, and other
such BDSM gear, but nothing has approached the complexity and ingenuity of
the Inforcer One.

The device comes with various component options.  The main piece is a
locking collar, on the thicker side to accommodate the technology inside
and sufficient batter power to run for several days, but once attached
quite secure.  Features include:

 	Wifi, LTE, and Bluetooth connectivity.  This allows easy
programming of the various settings and options through a website or
through the available Android and iPhone apps, and constant connectivity,
which ensures full control over the slave property.
 	Remote shock capabilities.  The included batteries, designed to
last for several days of use, allow for shocks to administer punishment to
the slave.  With levels 1-10, the shock levels are fully customizable.
WARNING: A level 10 shock will knock the slave to the ground and leave him
unable to move for several minutes (much like a TASER), and may knock some
slaves unconscious.  (Note: Regular use does decrease battery life, so
careful monitoring of the battery condition is recommended.  Text and email
alerts can be sent to the Owner when battery levels reach 20%.
 	GPS monitoring.  See where your slave is at any time.  Simply pull
up the location map online, or on the app, and know precisely where your
valuable property is located.
 	GPS-enabled Geofencing technology.  With a simple GPS chip and the
previously mentioned shock technology, a Master can easily establish a
perimeter for where his slave is allowed to go before a shock kicks in.
They can limit the slave to as small a radius as 5 feet, so the slave could
easily be left naked and simply wearing the Inforcer One collar at any
location, be it the back yard or a remote forest, and the slave would be
unable to leave without increasingly severe shocks.  Or, the Owner could
set the boundaries as the boundaries of his house, or his yard, or even his
town or his state, and go to work secure in the knowledge that his slave
will not be going anywhere he is not allowed.  The initial shock is
relatively mild, just a short warning that the slave should remain where he
is.  The following shocks increase in severity until the slave ceases
attempting to leave the allowed location.  This will be of enormous value
to Masters trying to ensure the safe, humane captivity of the human slave.
 	Comprehensive health monitoring.  Sensors located directly on the
slave's skin exposed to the collar monitor a full range of health
information on the slave, including body mass index (BMI), blood sugar,
heart rate, steps, distance traveled, estimated weight, a full fitness
tracker (think FitBit in a collar), and much more.  In a revolutionary
forward thinking achievement, the system recognizes if the slave is in
physical distress and can summon emergency services and alert the Owner,
allowing an Owner peace of mind in leaving his slave restrained or
geofenced.  The system automatically uploads the health information to the
cloud, allowing for easy tracking of a slave's progress and ensuring the
slave meets fitness goals the Owner sets.
 	Fire and CO2 sensing technology.  Similar to what is found in most
modern smoke detectors, the Inforcer One collar can sense smoke, and CO2,
and can release location restrictions in the event of a fire or CO2
emergency, giving Owners even more peace of mind.  The geofencing
technology allows the Owner to set a path, for example, out of the house
and to a secure place in the back yard, for the slave to safely exit the
home in the unlikely event of an emergency.
 	Two way cellular communications.  Pressing a button on the side of
the collar allows the slave to place a one way call to his Owner, allowing
contact for routine things, or in an emergency situation, as directed by
his Owner.  The program is hardwired to call only the Owner, so there is no
risk of the slave contacting individuals he is not allowed to contact.  Of
course, the Owner can also use the app to call the slave to give directions
as needed.  When wifi is available, the calls happen seamlessly over VOIP,
saving phone minutes for times when wifi is not available.
 	Integrated speaker, microphone, and vocal cord sensors.  The
microphone and speaker allow for the previously mentioned cellular
communications, but can be used for so much more.  First, the system allows
for automated voice commands to the slave, so the Master can determine when
and what his slave does easily.  For example, at 4:00pm, the collar can
announce to the slave that it is time to begin preparing dinner, and at
5:15pm it can tell the slave that the Owner is on his way home (using GPS
data from the Owner's cell phone) and that he should kneel and wait
patiently by the front door.  The possibilities of verbal orders are
virtually limitless.  Additionally, the microphone monitors a slave's
speaking and can be programmed to shock the slave if he speaks, assuming
the Owner wants a silent slave.  A sensor on the collar also monitors the
vocal cords directly, adding security to ensure total control over the
slave's voice.  Additionally, the Owner may choose to allow the slave to
listen to streaming music through the collar while he works, or may emit
white noise while the slave sleeps, among other functions.
 	Integrated high def camera.  Ever wonder if your valuable property
is doing what he has been instructed to do?  The Inforcer comes with a high
definition camera on its front side, which allows an Owner to view what his
slave is viewing at any time through a web browser or phone app.  You might
wonder how you ensure that the camera stays correctly positioned, but worry
not!  The designers have considered this, and the motion sensors detect if
the camera is not facing forward, and alert the slave through the speakers
to adjust, then gently encourage him to change it with an electric shock as
necessary.
 	Alarm clock function.  Want your slave awake at 5am while you sleep
to 8am?  No worries with the Inforcer One!  The slave can be easily
awakened through the integrated speakers, or by a few gentle (or not so
gentle) shocks to the slave's neck (and other body parts, as you will learn
ahead).  Your slave will be up and ready to serve at the time you choose.
 	Slava, the VoicePrint Digital Assistant (BETA).  The VoicePrint
Assistant, still in Beta, recognizes the Owner's voice and slave's voice,
and through Siri-like technology, understands commands from the Owner and
implements them on the Inforcer One.  So, an Owner can simply say, "Slava,
geofence the slave to a radius of 10 feet from his current location."  The
system will confirm that the command was received and processed, and the
slave will be unable to move more than 10 feet from his current GPS
location without a shock.  Or, the Owner can say, "Slava, shock level 5, 10
second burst" to give the slave a 10 second shock at medium settings.  This
could be used for simple punishment, or in an emergency should the slave
lash out at the Owner.  In addition to speaking commands to the collar
itself, the Owner can also use the voice button to issue commands through
the connected apps.  Voice command options are detailed in the online
documentation, and additional functions are expected soon.  This is
designed to make programming and using the collar easy, with little need to
use the app when making a change.
 	Maglock restraining and charging functions.  The collar (and
components) feature one or more maglock connectors, which allow them to
connect to the other components of the system by simply placing them
together and activating the maglock.  With items that are connected to a
power source, such as the SmartCharge board, they will charge while
connected to the maglock as well.
 	Long-lasting Battery Life.  The somewhat sizable collar (and
component units) are large enough to accommodate a relatively large
battery.  Under normal conditions, the Inforcer One is expected to last
approximately 5-7 days before needing to be recharged.  However, the
company does recommend charging every 3 days as a precaution in the first
weeks of use as the Owner learns the system and gets it set to his slave's
routines.
 	Third party connected apps and devices.  The device software will
be updated in the coming months to allow third party connected apps and
devices.  The developers of the Inforcer One say they are excited to see
what options the developer community bring to the table to supplement the
already impressive product.  One third party developer is already looking
into a connected cock gag, while another is planning a connected slave
cage.
 	Waterproof to 20 meters.  This will be a welcome relief to Owners
who want their slaves to bathe or shower daily.  WARNING: The weight of the
Inforcer One and its components make swimming nearly impossible Ð the
waterproofing is not designed with swimming in mind, and is hazardous to
the slave's health.  All components will automatically unlock if the system
senses the slave is below water and drowning.
 	Quality & Reliability.  These devices are made of high quality
stainless steel and are designed for constant use with relative comfort for
what should be many years.  Each device comes with a 5 year manufacturers
warranty.

As if this list of features is not enough to have every Owner Ð and most
slaves Ð hard and dripping, the device also offers multiple attachments
to make slave ownership and control even easier:
 	Connected Wrist Cuffs with locking functionality.  An exciting
accessory item, the connected wrist cuffs come with a range of features
mirroring and expanding the above.  They connect to the Inforcer One collar
control system through Bluetooth, and have the ability to also emit shocks,
lock and unlock remotely, sense motion, and detect when they come near
other parts of the system.  Some possible uses are for simple restraint, as
the two will snap and lock together magnetically when told to do so via the
app or voice command, or using a unique integrated pop out ring to attach
them to a chain or other secure point.  The electric shock can be
controlled much like the collar's own shock system, and can be used in
conjunction with it or separately.  For example, an Owner might not want
his slave to touch his collar and program the wrist cuffs to emit a shock
when they come within 5 or 8 inches of the collar.  With the locking
mechanism, you can easily attach the wrist cuff to the collar, the ball
collar, the ankle cuff, the SmartCharge Bondage Board, or a SmartLock
Connector.  With motion sensing and proximity detection to the collar, the
wrist cuffs are able to recognize a variety of movements, such as walking,
running, push ups, jumping jacks, and more.  This makes it very easy for
the Owner to program a series of exercises for the slave, and ensure they
are done properly and completely, as the system will shock the slave if
not.  Excellent for the Owner trying to keep his slave slim and trim, or
muscular and buff.  The wrist cuff can be sized to fit most slave wrists.
 	Connected Ankle Cuffs with locking functionality.  Functionality is
virtually identical to that of the wrist cuffs, but larger in size to
accommodate ankles.  For some smaller slaves, wrist cuffs might be used on
the ankles instead, and the system can be programmed to understand they are
being used as ankle cuffs.
 	Connected Ball Collar/Cock Ring and Buttplug (also with locking
functionalities).  Designed to be used as either a ball collar or cock ring
with a corded attached buttplug, the device contains many of the same
features as the wrist and ankle cuffs, with the notable differences of
being designed to attach to balls or around the cock and balls, and of the
attached (but detachable) buttplug.  The ball collar can also emit a shock
to the slave's genitals for punishment or a variety of other reasons, and
the proximity sensors will recognize the wrist cuffs coming too close for
too long (say 60 seconds to allow for cleaning and urination) and shock the
slave to prevent him from masturbating.  Perfect for the naughty slave who
can't be trusted to not touch himself.  The device is also designed to
sense an erection and can be programmed to emit shocks to negate the
erection and ensure slaves stay flaccid, if their Owner prefers.  The
connected buttplug, which can be detached by the Owner only, can sense
whether it is inserted, allowing the Owner to determine how much time the
slave must wear the plug and how much time it may be removed.  Some Owners
might only allow for the occasional 10 minute period for cleaning or a
bowel movement, while others might only require the slave to plug himself a
few hours a day.  When allowed outside of the rectum, the plug can attach
to the locking mechanism on the ball collar, so it stays out of the way.
Naturally, the buttplug can also emit electric shocks as programmed by the
Owner.  The owner may detach the buttplug and use the ball collar by
itself, but the buttplug cannot be used separately as the circuits for the
system are contained in the ball collar.  While the ball collar is designed
to be used as a cock ring, it is not a recommended function as it tends to
cause erections in slaves, while being attached as a ball collar allows for
chastity control and other functions, but does not cause erections.  This
system is a welcome update to chastity devices for most slaves and many
Masters, as it reduces the chafing and discomfort of having an entire
device locked around the cock and balls, while increasing security with
multiple sensors to detect masturbation, erections, and ejaculation.  The
Owner can be notified on his phone if the slave activates the chastity
punishment system, becomes erect, or ejaculates.
 	A SmartCharge Bondage Board with locking functionality.  While a
significant extra expense, you will soon understand why this is a must have
item in the system package.  Each Inforcer One component comes with a small
charger (similar to an iPhone charging base and cable), but as you might
imagine, connecting the total 6 devices to 6 separate charging cords is not
optimal, and would often require the Owner to remove the devices from their
slave.  The designers of the Inforcer One envisioned this problem, and
created this unique 7 foot by 3 foot (by .3 inch) board to help the Owners
ensure total captivity of their valuable human property.  The board has an
outline of the human form, with multiple maglock connectors at locations
for the collar, wrist and ankle cuffs, and of course the ball collar.  When
it is time to charge the devices, the slave only has to go to the board,
which can be located in a closet or the dungeon, or other out of the way
space, lay down on the board in the outline, fit each piece into the
maglock chargers, and the system will automatically lock each item to the
board and begin charging.  Then the slave may lay on the board and relax
for a short 3-6 hours while the components recharge.  (Note: The slave must
attach the ball collar first, as it uses a small cord given the positioning
of the balls several inches away from the board itself; all other parts can
attach to the flat, imbedded maglock chargers.)  In addition to allowing
the Inforcer to be worn at all times, the enormous benefit to the board is
the ability to program a designated time for charging, the system prompting
the slave that it is time to charge and "encouraging" them if necessary,
then of course automatically securing the slave to the board while the
system does the hard work of charging.  Slaves that have tested the board
say that it is relatively comfortable for the 3-6 hour charging period.
(Comfortable relative to slave life, at least.)  If you choose to purchase
the collar and wrist and ankle cuffs, you will definitely want the
SmartCharge Board to make charging all those items nearly effortless (at
least for the Owner).  While most Owners may have the slave sleep overnight
while the system charges, some wish to have charging done while the slave
is awake, and the designers of the system were kind enough to include sleep
monitoring abilities, and of course to allow the Owner to program electric
shocks or an alarm from the speakers to ensure that the slave does not
accidentally fall asleep when the system detects sleep.
 	SmartLock Connectors, with obvious locking functionality.  The
SmartLock Connectors are going to be necessary for nearly any user of any
part of the device.  They are relatively simple items Ð they simple
incorporate a maglock connector, and have rings for you to attach to other
points.  Example uses would be to attach them to a St.  Andrews Cross where
the Owner wants the slave to wait until he arrives home.  After the slave
finishes his chores, or at a specified time, he would go to the cross and
the SmartLock connector would automatically maglock his wrist cuffs to the
connector, and the slave would remain there securely until his owner
arrived home.  Or, the Owner could attach a SmartLock connector to a chain
in the basement wall and connect it to the collar, ball collar, wrist or
ankle cuffs, and keep the slave secured there until he released the lock,
or a time specified in the system.  This is an excellent way to restrict
the slave to certain portions of the home, as geofencing cannot operate
effectively inside a home with the lower GPS signals.  The possibilities
for using the SmartLock connectors to secure the slave in various places
and ways is virtually limitless.

As you might imagine, this level of technology does not come at a very
cheap price.  The base cost of the Inforcer One collar unit is $1500.  The
additional components are priced at:

 	Wrist Cuffs (set of 2): $350
 	Ankle Cuffs (set of 2): $400
 	Ball Collar / Cock Ring and Buttplug: $250
 	SmartCharge Bondage Board: $400
 	SmartLock Connectors: $150 each

So the entire system can be purchased for around $3,050 plus tax, which
when considering an investment in a permanent piece of valuable human
property, many Owners will agree that it is worth the cost.

There is a $10 monthly service charge for use of the apps and website to
program the Inforcer One.  A separate cellular contract must be purchased
if the Owner wants to use the cellular voice and data features, and since
the device uses minimal data the cost is an affordable $25 per month
through AT&T.  The annual cost of the service and cellular plans come out
to approximately $420 per year, or around $500 with taxes and fees.

The system is so well designed that it seems destined for the neck, wrists,
ankles, cocks/balls, and asses of slaves around the world.  Such a
wonderful new way to provide total security and captivity in a humane and
simple way for your valuable human property.


Unfortunately, this doesn't really exist, but the technology for virtually
all of it does exist right now (in 2016).  Maybe someone will get to work
on it!